Jinan Saibainuo Technology Development Co., Ltd
Jinan Saibainuo Technology Development Co., Ltd
Add to Cart
1. Machine features:
1. Can manufacture ten different shapes pet food for dog, cat, fish and bird and so on.
2. Only need small place for compact structure
3. High outputs and easy to operate
4. Saving manufacturing space and manufacture cost, also manual work for automation.
5. Pet dog and fish food formula designed free
6. Complete after service
7. Pay attention to pet food palatability.
2. Specification:
1. The Twin-screw extruder is made of the feeding system, extruding system, cutting system, heating system, transmission system and controlling system.
2. We will feed the material from the feeding machine and get the tissue state by inflating the material and the machine barrel must be high temperature, high pressure and high cutting. The material can be sterilized by the high temperature and high pressure and make the product safe.
3. The pet food machine is reasonable design, high capacity and high automatation.
4. The pet food consist of corn powder, soya powder, meat powder, bone powder etc. materials, raw materials are low cost but end pet food product is with high profit.
The screws are made of 38 CrMoAl, which is a speicial kind of ally steel and special design according to product’s requirement, using life is long, has combined model can freely assemble to get different status product.
5. Self-cleaning, when stopping, it can be cleaned without disassembling.
3.Equipment list:
| NO. | Machine Name | Technical Parameters |
| 1 | Blender SBN-350/C | Dimension(m): 1.8×1.2×1.8 Power:3kw Functions: makes raw material adding to water and liquid chemical additive fully mixed Features: 1. stainless steel material(1.5mm). 2. new handle-opened design of discharge holes,no material leak |
| 2 | Conditioner SBN-II-I | Dimension(m): 1.9×1.1×.2.2 Power: 2.2KW Functions: Conditioner precook the raw materials with steam to help enlarge the extruder processing capacity. Features: 1. fast mixing with high efficiency to fit the extruder.. 2. with steam valve to control the steam amount. |
| 3 | Extruder SBN85-II | Dimension(m): 3.9×0.9×1.9 Main motor:75KW Power: 102KW Length of Screw: 1650mm Diameter: 85mm Screw Barrel: Four Sections Heating Temperature: I Area about 70-80 degree, II Area about 100 degree, III Area about 130-140 degree, IV Area about 160 degree. Material of Screw: 38CrMoAl,more long life use,screw self-cleaning The control box of extruder can control temperature, voltage, current, heating temperature, the speed of the main machine, the speed of cutter and oil pump. |
| 4 | Air conveyor SBN-2.2 | Dimension(m): 1.1×0.6×0.5 Power: 2.2KW Functions: 1.conveys the food relying on the wind-force from the blower. 2.suitable for long distance conveying |
| 5 | Seven-layer dryer (electricity) SBN-7-8D | Dimension(m): 8.4×1.3×2.2 Power: 62.2KW Drive power of mesh wire conveying: 3KW Heating power: 50KW Mode of adjusting speed: frequency control of motor speed Drive power of mixing fan: 4.4kw Motor:siemens Material:stainless steel food grade(other supplier using Function: electricity heating,used to bake and dry food. |
Name: SLG Double Screw extruder
Function:Extrude and cook raw material into different size and shapes
Features:Screw material is 38CrMoAl with nitriding treatment, the hardness is 60HRC.. The barrel also use good material, hardness is 55HRC.
Name: Dryer
Function:There are three layer inside,each layer is 5 meters long, it can save space and energy. Electricity heating,used to bake and dry food.
Name: Whole processing line
Function:This is whole full automatic production line, normally there are four capacity we can supply:150kg/h, 250kg/h, 500kg/h and 1 ton/h.
Material mixing with water → material conveying → extruding → drying → oil spraying → flavoring → cooling → Storage
Motor brand: Siemens (bader), electric parts:Schneider Electric, Frenquency:LS, Gear case and gear:second generation
Cutting ways:Straight cut
Material of Frame: Carbon Steel, Material of Surface of Machine: stainless steel
Quality Control
For the spares before put in storage, we will make a strict test, and we will test the whole machine line before shippment.
We are the biggest manufacturer of extruder food machinery in Jinan city, China. Our company "Jinan Saibainuo Technology Development CO.,LTD "was established for about 20 years’ experiences. And we have passed many Certificates included CE, SGS, BV Certificates.